MITSUBISHI
Home >> Products >> MITSUBISHI >> L series PLC >> FA products >> FA-TH16YRA20SL Terminal module

FA-TH16YRA20SL Terminal module

MITSUBISHI FA-TH16YRA20SL Manual And Instructions
FA-TH16YRA20SL datasheetPDF datasheet

MITSUBISHI FA-TH16YRA20SL Product information and technical parameters:
Brand: MITSUBISHI
Name: Terminal module
Model: FA-TH16YRA20SL
Can be isolated from the output of the programmable controller, the a/b/c contact relay, SSR, Tr output.

Can be isolated from the output of the programmable controller, the a/b/c contact relay, SSR, Tr output.Number of input channels: 2Ch.
Input voltage: DC - 10 ~ 10V.
Input current: DC0 ~ 20mA.
Conversion speed: 80 s/ch.
Resolution: 1/12000.
Output channel number: 2Ch.
Output voltage: DC - 10 ~ 10V.
Output current: DC0 ~ 20mA FA-TH16YRA20SL.
Conversion speed: 80 s/ch.
Resolution: 1/12000.
Status of connected devices by means of alarm monitoring FA-TH16YRA20SL
Alarm output function
Process alarm.
When the digital value is in the range of preset, the output alarm.
Change rate alarm.
The output value of the output value of the digital output is too large (greater than the rate of change of the alarm limit) or too small (less than the rate of change), the output alarm FA-TH16YRA20SL.
Achieve stability measurement
Inter channel isolation
Isolation between the channels, can prevent the connection of sensors in the channel between the cross talk, so as to achieve stable measurement.
High speed, smooth continuous analog output.
Waveform output function
Equipped with the industry''s first waveform output function.
The pre prepared waveform data can be imported into the analog output module, and the function of the analog output is simulated according to the set conversion period FA-TH16YRA20SL.
It is not affected by the sequential scan time, and it can realize the high speed and smooth analog output. Can be isolated from the output of the programmable controller, the a/b/c contact relay, SSR, Tr output.DB A20 AnyWire master station.
Transmission distance: the longest 3km.
Data input and output: up to 1024 points.
Connect up to 128 units.
Enter 512 points, 512 points out of the output.
Support environmental protection, high speed, long distance transmission and special distribution system to support the special flat cable, universal VCTF cable, universal single wire cable and other cable.
Using original transmission mode, there is almost no branch limit,
Supports the automatic track and ring transmission,
Can also create suitable for small and medium sized factory wiring system.
Support remote I/O, analog quanntity, temperature and humidity terminal, anti false operation terminal and other equipment FA-TH16YRA20SL.
Up to 128 units from the station module
Can connect up to 128 units from the station module, for up to 1024 points (input 512 points / outputt 512 points) of the I/O control FA-TH16YRA20SL.
In addition, the parameters can be set through the switch, easy to set the transmission distance of 50m/200m/1km/3km.


...More relevant models >>>>