FX1S-30MT-D PLC
MITSUBISHI FX1S-30MT-D Manual And Instructions
FX1S-30MT-D datasheetPDF datasheet
FX1S-30MT-D PROGRAMMING MANUAL II
FX1S-30MT-D HARDWARE MANUAL
MITSUBISHI FX1S-30MT-D Product information and technical parameters：
Brand: MITSUBISHI
Name: PLC
Model: FX1S-30MT-D
Max input / output points: 30 points.
Power supply voltage: DC24V.
Input points: 16 points.
Output points: 14 points.
Output type: Transistor (source).
Power consumption (W): 21.
Weight (kg):0.45.
Size (WxHxD) mm:100x90x75.
Positioning and pulse output functions: a PLC cell can output 2 point 100KHz pulses at the same time.
PLC is equipped with 7 special positioning instructions,
Including zero return, absolute or relative address expression and special pulse output control.
Host has 10 points (6I/4O), 14 points (8I/6O), 20 points (12I/8O), 30 points (16I/14O) of 4 types.
This type of PLC is mainly used in all of the digital input, digital output control point of the device.
Can be directly connected to the 220V city power, built-in 8K step EEPROM memory, no battery, easy to maintain.
The series transistor output (MT) of the PLC, can be output 2 100KHz pulse, direct drive servo or stepper motor.
The series PLC can not be brought with the expansion module, but can be installed by the BD board to extend a small amount of I/O.
The series 1N through the installation of BD series PLC board, can achieve RS232, RS485, RS422 communication.
...More relevant models >>>>
FX1S-30MT-D datasheetPDF datasheet
FX1S-30MT-D PROGRAMMING MANUAL II
FX1S-30MT-D HARDWARE MANUAL
MITSUBISHI FX1S-30MT-D Product information and technical parameters：
Brand: MITSUBISHI
Name: PLC
Model: FX1S-30MT-D
Max input / output points: 30 points.
Power supply voltage: DC24V.
Input points: 16 points.
Output points: 14 points.
Output type: Transistor (source).
Power consumption (W): 21.
Weight (kg):0.45.
Size (WxHxD) mm:100x90x75.
Positioning and pulse output functions: a PLC cell can output 2 point 100KHz pulses at the same time.
PLC is equipped with 7 special positioning instructions,
Including zero return, absolute or relative address expression and special pulse output control.
Host has 10 points (6I/4O), 14 points (8I/6O), 20 points (12I/8O), 30 points (16I/14O) of 4 types.
This type of PLC is mainly used in all of the digital input, digital output control point of the device.
Can be directly connected to the 220V city power, built-in 8K step EEPROM memory, no battery, easy to maintain.
The series transistor output (MT) of the PLC, can be output 2 100KHz pulse, direct drive servo or stepper motor.
The series PLC can not be brought with the expansion module, but can be installed by the BD board to extend a small amount of I/O.
The series 1N through the installation of BD series PLC board, can achieve RS232, RS485, RS422 communication.
Total input and output points: 8 points.
Output points: 8 points.
Output type: transistor output.
FX Series in the compact body built in superior performance, and strive to operate simple.
In addition, rich options can meet the various needs of customers.
In the virtual factory will be rich in the function of a part of the introduction FX1S-30MT-D.
It is easy to control the analog quantity of the application FX1S-30MT-D
Can be extended to all models in the FX series analog devices.
Function extension board, special adapter without programming can be used for communication.
FX2N extension module.
The expansion module is an input and output expansion device of the power supply from the basic unit or the expansion unit,
Can choose the relay or crystal output models, to 8 points for the unit to connect FX1S-30MT-D.
Can be extended to FX3GA/FX3G, FX3GE, FX3GC, as well as FX3U, FX3UC series,
When connecting to FX3UC or FX3GC, you need FX2NC-CNV-IF or FX3UC-1PS-5V.
The number of connection points depends on the basic unit and the expansion unit. Function: Bitty AnyWire master station.
DC5V internal consumption current: 130mA FX1S-30MT-D. Expansion board for connection to a special adapter.Total input and output points: 32 points.
Input points: 16 points.
Output points: 16 points.
Output type: silicon controlled output.
Power supply voltage: AC100-240V.
Input signal voltage: DC24V.
Developed a range of special function modules to meet the needs of different - analog I/O, high speed counter.
Positioning control to achieve the 16 axis, the pulse train output or for the J and K type thermocouple or Pt sensor developed the temperature module.
A total of 8 special function modules can be configured for each FX2n main unit.
Taking into account space saving and processing speed.
Connector input and output type compact high performance universal machine.
Compact, scalable input / output.
Can connect analog quantity, communication, positioning, etc..
Rich special extension equipment for FX2N.
By connecting the compact FX2rvc series with the input and output expansion module.
The input and output can be extended to 256 points.
Built in 8000 step RAM memory.
By installing the memory card box, the maximum can be extended to the 16000 step.
Overseas oriented products meet all kinds of international standards.
Use terminal module to replace connector connection or relay terminal row connection,
So as to save the wiring inside the cabinet.
Customers can according to their own needs, free choice of MITSUBISHI motor micro programmable controller FX series.
FX series caan be widely used to control a variety of varied areas FX1S-30MT-D.
More convenient.
You can shorten the working hours of the development process by a minimal set of settings.
High reliability.
Excellent features, as always, quality and reliability. FX1S-30MT-D.
MITSUBISHI motor to recommend the third generation of micro programmable controller FX3 series.
High function, high precision, high cost performance.
Output points: 8 points.
Output type: transistor output.
FX Series in the compact body built in superior performance, and strive to operate simple.
In addition, rich options can meet the various needs of customers.
In the virtual factory will be rich in the function of a part of the introduction FX1S-30MT-D.
It is easy to control the analog quantity of the application FX1S-30MT-D
Can be extended to all models in the FX series analog devices.
Function extension board, special adapter without programming can be used for communication.
FX2N extension module.
The expansion module is an input and output expansion device of the power supply from the basic unit or the expansion unit,
Can choose the relay or crystal output models, to 8 points for the unit to connect FX1S-30MT-D.
Can be extended to FX3GA/FX3G, FX3GE, FX3GC, as well as FX3U, FX3UC series,
When connecting to FX3UC or FX3GC, you need FX2NC-CNV-IF or FX3UC-1PS-5V.
The number of connection points depends on the basic unit and the expansion unit. Function: Bitty AnyWire master station.
DC5V internal consumption current: 130mA FX1S-30MT-D. Expansion board for connection to a special adapter.Total input and output points: 32 points.
Input points: 16 points.
Output points: 16 points.
Output type: silicon controlled output.
Power supply voltage: AC100-240V.
Input signal voltage: DC24V.
Developed a range of special function modules to meet the needs of different - analog I/O, high speed counter.
Positioning control to achieve the 16 axis, the pulse train output or for the J and K type thermocouple or Pt sensor developed the temperature module.
A total of 8 special function modules can be configured for each FX2n main unit.
Taking into account space saving and processing speed.
Connector input and output type compact high performance universal machine.
Compact, scalable input / output.
Can connect analog quantity, communication, positioning, etc..
Rich special extension equipment for FX2N.
By connecting the compact FX2rvc series with the input and output expansion module.
The input and output can be extended to 256 points.
Built in 8000 step RAM memory.
By installing the memory card box, the maximum can be extended to the 16000 step.
Overseas oriented products meet all kinds of international standards.
Use terminal module to replace connector connection or relay terminal row connection,
So as to save the wiring inside the cabinet.
Customers can according to their own needs, free choice of MITSUBISHI motor micro programmable controller FX series.
FX series caan be widely used to control a variety of varied areas FX1S-30MT-D.
More convenient.
You can shorten the working hours of the development process by a minimal set of settings.
High reliability.
Excellent features, as always, quality and reliability. FX1S-30MT-D.
MITSUBISHI motor to recommend the third generation of micro programmable controller FX3 series.
High function, high precision, high cost performance.
...More relevant models >>>>
Last one: 
next one: Related download