FX2N-32MR-DS PLC
MITSUBISHI FX2N-32MR-DS Manual And Instructions
FX2N-32MR-DS datasheetPDF datasheet
FX2N-32MR-DS PROGRAMMING MANUAL II
MITSUBISHI FX2N-32MR-DS Product information and technical parameters：
Brand: MITSUBISHI
Name: PLC
Model: FX2N-32MR-DS
Max input / output points: 32 points.
Power supply voltage: 24VDC.
Input points: 16 points.
Output points: 16 points.
Output type: relay.
Power consumption: 25W.
Weight (kg):0.65.
Size (WxHxD) mm:150x90x87.
Note recording function, Component annotation can be recorded in the program register.
Online program editor, online change the program will not lose the working hours or stop production operation.
RUN/STOP switch, running on panel / stop switch easy to operate.
Remote maintenance, remote programming software can monitor, upload or uninstall programs and data via modem communications
Password protection, using a eight digit password to protect your program.
Clock function and hour meter function, all of the PLC FX2N has a real-time clock standard.
Continuous scanning function, to define the operation cycle for the application of the continuous scan time.
Input filter adjustment function, you can use the input filter to smooth the input signal (in the basic unit x000 to x017).
...More relevant models >>>>
FX2N-32MR-DS datasheetPDF datasheet
FX2N-32MR-DS PROGRAMMING MANUAL II
MITSUBISHI FX2N-32MR-DS Product information and technical parameters：
Brand: MITSUBISHI
Name: PLC
Model: FX2N-32MR-DS
Max input / output points: 32 points.
Power supply voltage: 24VDC.
Input points: 16 points.
Output points: 16 points.
Output type: relay.
Power consumption: 25W.
Weight (kg):0.65.
Size (WxHxD) mm:150x90x87.
Note recording function, Component annotation can be recorded in the program register.
Online program editor, online change the program will not lose the working hours or stop production operation.
RUN/STOP switch, running on panel / stop switch easy to operate.
Remote maintenance, remote programming software can monitor, upload or uninstall programs and data via modem communications
Password protection, using a eight digit password to protect your program.
Clock function and hour meter function, all of the PLC FX2N has a real-time clock standard.
Continuous scanning function, to define the operation cycle for the application of the continuous scan time.
Input filter adjustment function, you can use the input filter to smooth the input signal (in the basic unit x000 to x017).
Analog output expansion board (1 channel).
Can be installed in FX1N, PLC FX1S, providing 1 channel analog input of the board.
Because it is embedded in the PLC installation, so do not need to install space.
Can easily control the speed of the inverter. Input and output points: 40 points.
Power supply: AC100-240V FX2N-32MR-DS.
Input points: 24 points.
Output points: 16 points.
Output form: transistor output (source) FX2N-32MR-DS
Power consumption: 37W.
Weight: 0.7KG.
Outline dimension: 130x90x86mm.
FX3GE on the performance of the FX3GA increased analog input / output and Ethernet communication and other built-in features.
Applicable to a wide variety of applications.
Basic unit: 24/40 point.
Third generation standard model FX2N-32MR-DS.
High flexibility.
Suitable for small scale control of high cost PLC.
Control points to 128 points, the use of CC-Link remote I/O can control the maximum 256 points.
A versatile PLC.
Built in CPU, power supply, input and output, analog input and output, Ethernet port, can be used immediately after the purchase.
High speed operation.
Basic instructions: 0.21 s/ instruction.
Application instruction: 0 FX2N-32MR-DS. 5 s/ instruction.
Large capacity memory.
Built in program memory 32000 steps.
EEPROM memory cartridge with program transfer function. Built in CC-LINK/LT master function PLC.
From the scene of the complex wiring operations, such as the liberation of false wiring,
FX3UC basic unit standard, distribution network CC-LINK/LT.
The I/O module can be easily controlled by using only the FX3UC basic unit.
The input and output of the program is automatically assigned to the remote I/O station I/O,
So it doesn''t need complicated parameter setting.
Has the same function as the CC-LINK/LT master station module.
By installing the high speed, high performance PLC and CC-LINKK/LT master function organically combined together to achieve a superior price FX2N-32MR-DS.
FX3UC basic single built in the network with the power 0.35A.
For the less number of remote I/O, there is no external power adapter, can also be connected tto the FX2N-32MR-DS.
Input and output maximum 256 points.
For the extension of the device connected to the basic unit, the total up to 256 points can be controlled.
Can be installed in FX1N, PLC FX1S, providing 1 channel analog input of the board.
Because it is embedded in the PLC installation, so do not need to install space.
Can easily control the speed of the inverter. Input and output points: 40 points.
Power supply: AC100-240V FX2N-32MR-DS.
Input points: 24 points.
Output points: 16 points.
Output form: transistor output (source) FX2N-32MR-DS
Power consumption: 37W.
Weight: 0.7KG.
Outline dimension: 130x90x86mm.
FX3GE on the performance of the FX3GA increased analog input / output and Ethernet communication and other built-in features.
Applicable to a wide variety of applications.
Basic unit: 24/40 point.
Third generation standard model FX2N-32MR-DS.
High flexibility.
Suitable for small scale control of high cost PLC.
Control points to 128 points, the use of CC-Link remote I/O can control the maximum 256 points.
A versatile PLC.
Built in CPU, power supply, input and output, analog input and output, Ethernet port, can be used immediately after the purchase.
High speed operation.
Basic instructions: 0.21 s/ instruction.
Application instruction: 0 FX2N-32MR-DS. 5 s/ instruction.
Large capacity memory.
Built in program memory 32000 steps.
EEPROM memory cartridge with program transfer function. Built in CC-LINK/LT master function PLC.
From the scene of the complex wiring operations, such as the liberation of false wiring,
FX3UC basic unit standard, distribution network CC-LINK/LT.
The I/O module can be easily controlled by using only the FX3UC basic unit.
The input and output of the program is automatically assigned to the remote I/O station I/O,
So it doesn''t need complicated parameter setting.
Has the same function as the CC-LINK/LT master station module.
By installing the high speed, high performance PLC and CC-LINKK/LT master function organically combined together to achieve a superior price FX2N-32MR-DS.
FX3UC basic single built in the network with the power 0.35A.
For the less number of remote I/O, there is no external power adapter, can also be connected tto the FX2N-32MR-DS.
Input and output maximum 256 points.
For the extension of the device connected to the basic unit, the total up to 256 points can be controlled.
...More relevant models >>>>
Last one: 
next one: Related download