FA-TBS40P Conversion module
MITSUBISHI FA-TBS40P Manual And Instructions
FA-TBS40P datasheetPDF datasheet
MITSUBISHI FA-TBS40P Product information and technical parameters：
Brand: MITSUBISHI
Name: Conversion module
Model: FA-TBS40P
Converts the built-in I/O function to the screw terminal.
...More relevant models >>>>
FA-TBS40P datasheetPDF datasheet
MITSUBISHI FA-TBS40P Product information and technical parameters：
Brand: MITSUBISHI
Name: Conversion module
Model: FA-TBS40P
Converts the built-in I/O function to the screw terminal.
Output points: 32 points.
Output type: leakage type.
Rated output voltage: DC12 ~ 24V.
Max load current: 0.1A/1 point.
Protection function: have.
Common way: 32 point / public end.
Input / output occupied points: 32 points (I/O distribution: output 32 points).
External wiring connection mode: 40 pin connector FA-TBS40P.
The switch input and output module is a device which can collect the input / output of the switch signal,
Digital I/O modules are often called FA-TBS40P
The switch signal is collected to the computer or the computer to send the relevant instructions through the RS-485 bus to control the switch of the switch,
Can also be carried out through the RS-485 bus communication,
Remote control switch.
Communication protocol is a standard Modbus protocol or custom protocol FA-TBS40P. The connector is converted to a screw relay terminal.Display characters: 16 x 4 character line width.
Display character: English letters and numbers (full / half), Katakana (full / half), hiragana (angle), (angle), symbol Chinese characters (full / half).
Language switch: Chinese / english.
Backlight display: green (normal), red (abnormal) FA-TBS40P.
Weight 0.03kg. Output channel number: 4ch.
Output voltage: DC - 10 ~ 10V.
Output current: DC0 ~ 20mA.
Conversion speed: 20 s/ch.
Resolution: 1/20000.
Status of connected devices by means of alarm monitoring.
Alarm output function
Process alarm.
When the digital value is in the range of preset, the output alarm.
Change rate alarm.
The output value of the output value of the digital output is too large (greater than the rate of change of the alarm limit) or too small (less than the rate of change), the output alarm.
Achieve stability measurement
Inter channel isolation
Isolation between the channels, can prevent the connection of sensors in the channel between the cross talk, so as to achieve stable measurement.
High speed, smooth ccontinuous analog output FA-TBS40P.
Waveform output function
Equipped with the industry''s first waveform output function.
The pre prepared waveform data can be imported into the analog output module, and the function of the analog output is simulatted according to the set conversion period FA-TBS40P.
It is not affected by the sequential scan time, and it can realize the high speed and smooth analog output.
Output type: leakage type.
Rated output voltage: DC12 ~ 24V.
Max load current: 0.1A/1 point.
Protection function: have.
Common way: 32 point / public end.
Input / output occupied points: 32 points (I/O distribution: output 32 points).
External wiring connection mode: 40 pin connector FA-TBS40P.
The switch input and output module is a device which can collect the input / output of the switch signal,
Digital I/O modules are often called FA-TBS40P
The switch signal is collected to the computer or the computer to send the relevant instructions through the RS-485 bus to control the switch of the switch,
Can also be carried out through the RS-485 bus communication,
Remote control switch.
Communication protocol is a standard Modbus protocol or custom protocol FA-TBS40P. The connector is converted to a screw relay terminal.Display characters: 16 x 4 character line width.
Display character: English letters and numbers (full / half), Katakana (full / half), hiragana (angle), (angle), symbol Chinese characters (full / half).
Language switch: Chinese / english.
Backlight display: green (normal), red (abnormal) FA-TBS40P.
Weight 0.03kg. Output channel number: 4ch.
Output voltage: DC - 10 ~ 10V.
Output current: DC0 ~ 20mA.
Conversion speed: 20 s/ch.
Resolution: 1/20000.
Status of connected devices by means of alarm monitoring.
Alarm output function
Process alarm.
When the digital value is in the range of preset, the output alarm.
Change rate alarm.
The output value of the output value of the digital output is too large (greater than the rate of change of the alarm limit) or too small (less than the rate of change), the output alarm.
Achieve stability measurement
Inter channel isolation
Isolation between the channels, can prevent the connection of sensors in the channel between the cross talk, so as to achieve stable measurement.
High speed, smooth ccontinuous analog output FA-TBS40P.
Waveform output function
Equipped with the industry''s first waveform output function.
The pre prepared waveform data can be imported into the analog output module, and the function of the analog output is simulatted according to the set conversion period FA-TBS40P.
It is not affected by the sequential scan time, and it can realize the high speed and smooth analog output.
...More relevant models >>>>
Last one: MITSUBISHI AnyWireASLINK master module LJ51AW12AL
next one: MITSUBISHI Positioning signal conversion module FA-PT1LBD
Related download