FX1S-14MR-DS PLC
MITSUBISHI FX1S-14MR-DS Manual And Instructions
FX1S-14MR-DS datasheetPDF datasheet
FX1S-14MR-DS PROGRAMMING MANUAL II
FX1S-14MR-DS HARDWARE MANUAL
MITSUBISHI FX1S-14MR-DS Product information and technical parameters：
Brand: MITSUBISHI
Name: PLC
Model: FX1S-14MR-DS
Max input / output points: 14 points.
Power supply voltage: 24VDC.
Input points: 8 points.
Output points: 6 points.
Output type: relay.
Power consumption (W): 6.5.
Weight (kg):0.22.
Size (WxHxD) mm:60x90x49.
Host has 10 points (6I/4O), 14 points (8I/6O), 20 points (12I/8O), 30 points (16I/14O) of 4 types.
This type of PLC is mainly used in all of the digital input, digital output control point of the device.
Can be directly connected to the 220V city power, built-in 8K step EEPROM memory, no battery, easy to maintain.
The series transistor output (MT) of the PLC, can be output 2 100KHz pulse, direct drive servo or stepper motor.
The series PLC can not be brought with the expansion module, but can be installed by the BD board to extend a small amount of I/O.
The series 1N through the installation of BD series PLC board, can achieve RS232, RS485, RS422 communication.
All equipment is digital input and output point.
The total I/O points are not more than 30 points, and the input points are less than 16, the output points are less than 14.
Its MT series of PLC can drive 2 way servo or stepper, commonly used in the control system for a simple manipulator.
...More relevant models >>>>
FX1S-14MR-DS datasheetPDF datasheet
FX1S-14MR-DS PROGRAMMING MANUAL II
FX1S-14MR-DS HARDWARE MANUAL
MITSUBISHI FX1S-14MR-DS Product information and technical parameters：
Brand: MITSUBISHI
Name: PLC
Model: FX1S-14MR-DS
Max input / output points: 14 points.
Power supply voltage: 24VDC.
Input points: 8 points.
Output points: 6 points.
Output type: relay.
Power consumption (W): 6.5.
Weight (kg):0.22.
Size (WxHxD) mm:60x90x49.
Host has 10 points (6I/4O), 14 points (8I/6O), 20 points (12I/8O), 30 points (16I/14O) of 4 types.
This type of PLC is mainly used in all of the digital input, digital output control point of the device.
Can be directly connected to the 220V city power, built-in 8K step EEPROM memory, no battery, easy to maintain.
The series transistor output (MT) of the PLC, can be output 2 100KHz pulse, direct drive servo or stepper motor.
The series PLC can not be brought with the expansion module, but can be installed by the BD board to extend a small amount of I/O.
The series 1N through the installation of BD series PLC board, can achieve RS232, RS485, RS422 communication.
All equipment is digital input and output point.
The total I/O points are not more than 30 points, and the input points are less than 16, the output points are less than 14.
Its MT series of PLC can drive 2 way servo or stepper, commonly used in the control system for a simple manipulator.
Function: CPU module (internal service power supply).
Input and output points: 32 points.
Power supply capacity (DC5V power): 1100mA.
Power supply capacity (DC24V service power supply): 600mA.
Input / output mode: DC input (drain / source) / transistor (source).
Input points: 32 points.
Output points: 32 points FX1S-14MR-DS.
The new expansion module is more convenient!
Pioneer products with advanced built-in functions and rich extensibility FX1S-14MR-DS
FX5U built-in analog, communication, high speed input and output,
By extending the board and adapter can be easily extended system.
In addition, through the high speed system bus,
Can maximize the role of the built-in intelligent functions of the expansion device.
Total input and output points: 32 points FX1S-14MR-DS.
Input points: 16 points.
Output points: 16 points.
Output type: transistor output.
Power supply voltage: AC100-240V.
Input signal voltage: DC24V.
Developed a range of special function modules to meet the needs of different - analog I/O, high speed counter.
Positioning control to achieve the 16 axis, the pulse train output or for the J and K type thermocouple or Pt sensor developed the temperature module FX1S-14MR-DS.
A total of 8 special function modules can be configured for each FX2n main unit.
Taking into account space saving and processing speed.
Connector input and output type compact high performance universal machine.
Compact, scalable input / output.
Can connect analog quantity, communication, positioning, etc..
Rich special extension equipment for FX2N.
By connecting the compact FX2rvc series with the input and output expansion module.
The input and output can be extended to 256 points.
Built in 8000 step RAM memory.
By installing the memory card box, the maximum can be extended to the 16000 step.
Overseas oriented products meet all kinds of international standards.
Use terminal module to replace connector connection or relay terminal row connection,
So as to save the wiring inside the cabinet.
Customers can according to their own needs, free choice of MITSUBISHI motor micro programmable controller FX series.
FX series cann be widely used to control a variety of varied areas FX1S-14MR-DS.
More convenient.
You can shorten the working hours of the development process by a minimal set of settings.
High reliability.
Excellent features, as always, quality and reliability. FX1S-14MR-DS.
MITSUBISHI motor to recommend the third generation of micro programmable controller FX3 series.
High function, high precision, high cost performance.
Input and output points: 32 points.
Power supply capacity (DC5V power): 1100mA.
Power supply capacity (DC24V service power supply): 600mA.
Input / output mode: DC input (drain / source) / transistor (source).
Input points: 32 points.
Output points: 32 points FX1S-14MR-DS.
The new expansion module is more convenient!
Pioneer products with advanced built-in functions and rich extensibility FX1S-14MR-DS
FX5U built-in analog, communication, high speed input and output,
By extending the board and adapter can be easily extended system.
In addition, through the high speed system bus,
Can maximize the role of the built-in intelligent functions of the expansion device.
Total input and output points: 32 points FX1S-14MR-DS.
Input points: 16 points.
Output points: 16 points.
Output type: transistor output.
Power supply voltage: AC100-240V.
Input signal voltage: DC24V.
Developed a range of special function modules to meet the needs of different - analog I/O, high speed counter.
Positioning control to achieve the 16 axis, the pulse train output or for the J and K type thermocouple or Pt sensor developed the temperature module FX1S-14MR-DS.
A total of 8 special function modules can be configured for each FX2n main unit.
Taking into account space saving and processing speed.
Connector input and output type compact high performance universal machine.
Compact, scalable input / output.
Can connect analog quantity, communication, positioning, etc..
Rich special extension equipment for FX2N.
By connecting the compact FX2rvc series with the input and output expansion module.
The input and output can be extended to 256 points.
Built in 8000 step RAM memory.
By installing the memory card box, the maximum can be extended to the 16000 step.
Overseas oriented products meet all kinds of international standards.
Use terminal module to replace connector connection or relay terminal row connection,
So as to save the wiring inside the cabinet.
Customers can according to their own needs, free choice of MITSUBISHI motor micro programmable controller FX series.
FX series cann be widely used to control a variety of varied areas FX1S-14MR-DS.
More convenient.
You can shorten the working hours of the development process by a minimal set of settings.
High reliability.
Excellent features, as always, quality and reliability. FX1S-14MR-DS.
MITSUBISHI motor to recommend the third generation of micro programmable controller FX3 series.
High function, high precision, high cost performance.
...More relevant models >>>>
Last one: 
next one: Related download