NZ2EHG-T8 Industrial grade switching hub
MITSUBISHI NZ2EHG-T8 Manual And Instructions
NZ2EHG-T8 datasheetPDF datasheet
MITSUBISHI NZ2EHG-T8 Product information and technical parameters：
Brand: MITSUBISHI
Name: Industrial grade switching hub
Model: NZ2EHG-T8
Industrial level switch hub.
NZ2EHG-T8 supports 10Mbps/100Mbps/1Gbps transfer rate.
With MDI/MDI-X Auto function, automatic negotiation function, etc..
The use of automatic power regulation function, can make up to a reduction of about 80%*2.
Do not use the cooling fan, but can be in a larger ambient temperature range (0 ~ 50 degrees C) normal operation.
By using simple and easy loading and unloading DIN guide rail fixing mechanism, all kinds of installation can be easily carried out.
...More relevant models >>>>
NZ2EHG-T8 datasheetPDF datasheet
MITSUBISHI NZ2EHG-T8 Product information and technical parameters：
Brand: MITSUBISHI
Name: Industrial grade switching hub
Model: NZ2EHG-T8
Industrial level switch hub.
NZ2EHG-T8 supports 10Mbps/100Mbps/1Gbps transfer rate.
With MDI/MDI-X Auto function, automatic negotiation function, etc..
The use of automatic power regulation function, can make up to a reduction of about 80%*2.
Do not use the cooling fan, but can be in a larger ambient temperature range (0 ~ 50 degrees C) normal operation.
By using simple and easy loading and unloading DIN guide rail fixing mechanism, all kinds of installation can be easily carried out.
Type: 18 point terminal.
Input / output form: analog voltage and current input.
Number of stations: 1 stops.
Number of channels: 4 channels.
The conversion speed of the analog input module can be selected from 100 mu s/ channel, 400 mu s/ channel and 1 mu s/ channel.
The conversion speed of the analog output module is 100 mu s/ channel NZ2EHG-T8.
By combining the analog input module and the expansion module, the switching time can be controlled more precisely NZ2EHG-T8 (trigger conversion function)
IE CC-Link field network remote equipment station. According to the equipment, more easily distributed input and output devices.
Can be connected to the expansion module, more convenient to expand the input and output points NZ2EHG-T8.
Support synchronous communication (using with simple motion control module).
According to the simple motion control module of the network (Master) control cycle of the implementation of the control cycle and its synchronization,
Implementation of multiple simultaneous action from the station. Type: 18 point terminal.
Output: DC - 10 ~ 10V, DC0 ~ 20mA.
Conversion speed: 100 s/ch.
Number of channels: 4 channels NZ2EHG-T8.
The conversion speed of the analog input module can be selected from 100 mu s/ channel, 400 mu s/ channel and 1 mu s/ channel.
The conversion speed of the analog output module is 100 mu s/ channel.
By combining the analog input module and the expansion module, the switching time can be controlled more precisely. (trigger conversion function)
IE CC-Link field network remote equipment station. According to the equipment, more easily distributed input and output devices.
Can be connected to the expansion module, more convenient to expand the input and output points.
Support synchronous communication (using with simple motion control module).
According to the simple motion control module of the network (Master) control cycle of the implementation of the control cycle and its synchronization,
Implementation of multiple simultaneous action from the station. Type: MIL connector.
Output form: transistor output, source.
Output points: 16 points.
Rated input voltage / current: DC12/24V (0.5A).
External connection: 1 wire.
By using the output ON number of times, it is convenient to confirm the total number of ON of each output point.
High speed input and output control of a single module can be realized by using first order logic function.
IE CC-Link field network remote equipment station. According to the equipment, more easily distributed input and output devices.
Caan be connected to the expansion module, more convenient to expand the input and output points NZ2EHG-T8.
Support synchronous communication (using with simple motion control module).
According to the simple motion control module of the network (Mastter) control cycle of the implementation of the control cycle and its synchronization,
Implementation of multiple simultaneous action from the station NZ2EHG-T8.
Input / output form: analog voltage and current input.
Number of stations: 1 stops.
Number of channels: 4 channels.
The conversion speed of the analog input module can be selected from 100 mu s/ channel, 400 mu s/ channel and 1 mu s/ channel.
The conversion speed of the analog output module is 100 mu s/ channel NZ2EHG-T8.
By combining the analog input module and the expansion module, the switching time can be controlled more precisely NZ2EHG-T8 (trigger conversion function)
IE CC-Link field network remote equipment station. According to the equipment, more easily distributed input and output devices.
Can be connected to the expansion module, more convenient to expand the input and output points NZ2EHG-T8.
Support synchronous communication (using with simple motion control module).
According to the simple motion control module of the network (Master) control cycle of the implementation of the control cycle and its synchronization,
Implementation of multiple simultaneous action from the station. Type: 18 point terminal.
Output: DC - 10 ~ 10V, DC0 ~ 20mA.
Conversion speed: 100 s/ch.
Number of channels: 4 channels NZ2EHG-T8.
The conversion speed of the analog input module can be selected from 100 mu s/ channel, 400 mu s/ channel and 1 mu s/ channel.
The conversion speed of the analog output module is 100 mu s/ channel.
By combining the analog input module and the expansion module, the switching time can be controlled more precisely. (trigger conversion function)
IE CC-Link field network remote equipment station. According to the equipment, more easily distributed input and output devices.
Can be connected to the expansion module, more convenient to expand the input and output points.
Support synchronous communication (using with simple motion control module).
According to the simple motion control module of the network (Master) control cycle of the implementation of the control cycle and its synchronization,
Implementation of multiple simultaneous action from the station. Type: MIL connector.
Output form: transistor output, source.
Output points: 16 points.
Rated input voltage / current: DC12/24V (0.5A).
External connection: 1 wire.
By using the output ON number of times, it is convenient to confirm the total number of ON of each output point.
High speed input and output control of a single module can be realized by using first order logic function.
IE CC-Link field network remote equipment station. According to the equipment, more easily distributed input and output devices.
Caan be connected to the expansion module, more convenient to expand the input and output points NZ2EHG-T8.
Support synchronous communication (using with simple motion control module).
According to the simple motion control module of the network (Mastter) control cycle of the implementation of the control cycle and its synchronization,
Implementation of multiple simultaneous action from the station NZ2EHG-T8.
...More relevant models >>>>
Last one: MITSUBISHI Bridge module NZ2GF-CCB
next one: MITSUBISHI Industrial grade switching hub NZ2EHF-T8
Related download