RJ61BT11 CC-Link module
MITSUBISHI RJ61BT11 Manual And Instructions
RJ61BT11 datasheetPDF datasheet
MITSUBISHI RJ61BT11 Product information and technical parameters：
Brand: MITSUBISHI
Name: CC-Link module
Model: RJ61BT11
10Mbps Max., master / local station, support Ver.2 CC-Link.
CC-Link is a bus (RS-485) - type open field network which can control and information processing at the same time.
Can be in the CC-Link and high-speed transmission of ON/OFF information from the station equipment, such as bit data, analog information, such as digital data.
Connect all kinds of field equipment through CC-Link.
Can connect all kinds of support CC-Link field equipment, according to various control requirements to build the corresponding system.
Use remote device network mode, up to 64 remote equipment such as analog devices, etc..
...More relevant models >>>>
RJ61BT11 datasheetPDF datasheet
MITSUBISHI RJ61BT11 Product information and technical parameters：
Brand: MITSUBISHI
Name: CC-Link module
Model: RJ61BT11
10Mbps Max., master / local station, support Ver.2 CC-Link.
CC-Link is a bus (RS-485) - type open field network which can control and information processing at the same time.
Can be in the CC-Link and high-speed transmission of ON/OFF information from the station equipment, such as bit data, analog information, such as digital data.
Connect all kinds of field equipment through CC-Link.
Can connect all kinds of support CC-Link field equipment, according to various control requirements to build the corresponding system.
Use remote device network mode, up to 64 remote equipment such as analog devices, etc..
The input and output module installation number: 8.
Can install module: MELSEC-Q series module.
DIN guide rail mounting adapter type: Q6DIN1.
Size (H) * (44.1mm) * (W) * (D): * 328mm * 98mm.
Substrate module for mounting various modules of MELSEC-Q series.
Extended use of Q series expansion substrates in the following extensions RJ61BT11. "Operation control mode: stored procedure repeated operation RJ61BT11
Built in IE CC-Link.
Input / output points: 4096 points.
Program capacity: 80K.
Increase the speed of a constant cycle interrupt program.
Perform a minimum interval constant period interrupt program can be shortened to 50 s,
Programmable logic controller can read more high-speed signals.
In addition, the interrupt routine can be set priority, and the interrupt program with high priority is executed when the interrupt processing is interrupted RJ61BT11.
Therefore, when the signal is read at a high speed, the program can read the signal from the constant cycle of the conventional input module +CPU module.
Data management using database functions.
Data and production performance data through computer management in the past can be managed by database management of a built-in programmable controller RJ61BT11.
Database can be created in the SD memory card, and can use the special instructions to easily add, update, retrieve, delete data.
In addition, the database can be imported and exported through the Unicode text file format,
Share data with spreadsheet software. In particular, can be flexibly used in the production of many varieties of food and beverage production line and other fields,
Effectively carry out the change of formula data and the management of production performance. Analog output channel number: 8CH.
accuracy
Ambient temperature of 25 plus or minus 5 degrees C: plus or minus 0.1%.
Ambient temperature 0 ~ 55 degrees C: plus or minus 0.3%.
Temperature coefficient.
Conversion speed: 80 s/CH.
Channel to channel insulation
Output short circuit protection: have.
External power supply: DC24.
External wiring connection mode: 18 point screw terminal.
Voltage output
Digital input value: -.
Analog output voltage: -.
Current output
Digital input value: 0 ~ 32000.
Analog output current: DC0 ~ 20mA.
High speed output flow simulation waveform.
The analog output module has the function of registering arbitrary waveform data to the module, and continuously executing the analog output according to the set conversion cycle.
Execute the analog quantity (torque) control of stamping machine and injection molding machine, can automatically output the control waveform,
Through the process of high speed, smooth control. In addition, only prior to the waveform data are registered in the module,
Can easily control the analog waveform, so the production line conntrol, such as repetitive control,
Without using a special program to create the waveform, can reduce the programming time RJ61BT11.
Module binding function.
Combined with the use of up to 64 sets of temperature control module for temperature controol RJ61BT11. Can be combined with the function of the following two points.
Heating function between modules.
Peak current suppression function between modules.
Can install module: MELSEC-Q series module.
DIN guide rail mounting adapter type: Q6DIN1.
Size (H) * (44.1mm) * (W) * (D): * 328mm * 98mm.
Substrate module for mounting various modules of MELSEC-Q series.
Extended use of Q series expansion substrates in the following extensions RJ61BT11. "Operation control mode: stored procedure repeated operation RJ61BT11
Built in IE CC-Link.
Input / output points: 4096 points.
Program capacity: 80K.
Increase the speed of a constant cycle interrupt program.
Perform a minimum interval constant period interrupt program can be shortened to 50 s,
Programmable logic controller can read more high-speed signals.
In addition, the interrupt routine can be set priority, and the interrupt program with high priority is executed when the interrupt processing is interrupted RJ61BT11.
Therefore, when the signal is read at a high speed, the program can read the signal from the constant cycle of the conventional input module +CPU module.
Data management using database functions.
Data and production performance data through computer management in the past can be managed by database management of a built-in programmable controller RJ61BT11.
Database can be created in the SD memory card, and can use the special instructions to easily add, update, retrieve, delete data.
In addition, the database can be imported and exported through the Unicode text file format,
Share data with spreadsheet software. In particular, can be flexibly used in the production of many varieties of food and beverage production line and other fields,
Effectively carry out the change of formula data and the management of production performance. Analog output channel number: 8CH.
accuracy
Ambient temperature of 25 plus or minus 5 degrees C: plus or minus 0.1%.
Ambient temperature 0 ~ 55 degrees C: plus or minus 0.3%.
Temperature coefficient.
Conversion speed: 80 s/CH.
Channel to channel insulation
Output short circuit protection: have.
External power supply: DC24.
External wiring connection mode: 18 point screw terminal.
Voltage output
Digital input value: -.
Analog output voltage: -.
Current output
Digital input value: 0 ~ 32000.
Analog output current: DC0 ~ 20mA.
High speed output flow simulation waveform.
The analog output module has the function of registering arbitrary waveform data to the module, and continuously executing the analog output according to the set conversion cycle.
Execute the analog quantity (torque) control of stamping machine and injection molding machine, can automatically output the control waveform,
Through the process of high speed, smooth control. In addition, only prior to the waveform data are registered in the module,
Can easily control the analog waveform, so the production line conntrol, such as repetitive control,
Without using a special program to create the waveform, can reduce the programming time RJ61BT11.
Module binding function.
Combined with the use of up to 64 sets of temperature control module for temperature controol RJ61BT11. Can be combined with the function of the following two points.
Heating function between modules.
Peak current suppression function between modules.
...More relevant models >>>>
Last one: MITSUBISHI IE Field CC-Link network module RJ71GF11-T2
next one: MITSUBISHI Serial communication module RJ71C24
Related download