FX1S-30MT-DSS PLC
MITSUBISHI FX1S-30MT-DSS Manual And Instructions
FX1S-30MT-DSS datasheetPDF datasheet
FX1S-30MT-DSS PROGRAMMING MANUAL II
FX1S-30MT-DSS HARDWARE MANUAL
MITSUBISHI FX1S-30MT-DSS Product information and technical parameters：
Brand: MITSUBISHI
Name: PLC
Model: FX1S-30MT-DSS
The largest input / output points: 30 points.
Power supply voltage: 24VDC.
Input points: 16 points.
Output points: 14 points.
Output type: Transistor (source).
Power consumption (W): 8.
Weight (kg):0.35.
Size (WxHxD) mm:100x90x49.
All equipment is digital input and output point.
The total I/O points are not more than 30 points, and the input points are less than 16, the output points are less than 14.
Its MT series of PLC can drive 2 way servo or stepper, commonly used in the control system for a simple manipulator.
MITSUBISHI FX1S series PLC is suitable for the smallest package,
It is the preferred target for low cost users to seek powerful control over a limited range of I/0.
FX1S provides up to 30 I/O points, and can be transmitted through serial communication data,
MT models also have the ability to locate, widely used in a variety of small mechanical equipment.
...More relevant models >>>>
FX1S-30MT-DSS datasheetPDF datasheet
FX1S-30MT-DSS PROGRAMMING MANUAL II
FX1S-30MT-DSS HARDWARE MANUAL
MITSUBISHI FX1S-30MT-DSS Product information and technical parameters：
Brand: MITSUBISHI
Name: PLC
Model: FX1S-30MT-DSS
The largest input / output points: 30 points.
Power supply voltage: 24VDC.
Input points: 16 points.
Output points: 14 points.
Output type: Transistor (source).
Power consumption (W): 8.
Weight (kg):0.35.
Size (WxHxD) mm:100x90x49.
All equipment is digital input and output point.
The total I/O points are not more than 30 points, and the input points are less than 16, the output points are less than 14.
Its MT series of PLC can drive 2 way servo or stepper, commonly used in the control system for a simple manipulator.
MITSUBISHI FX1S series PLC is suitable for the smallest package,
It is the preferred target for low cost users to seek powerful control over a limited range of I/0.
FX1S provides up to 30 I/O points, and can be transmitted through serial communication data,
MT models also have the ability to locate, widely used in a variety of small mechanical equipment.
Input output cable for A6TBXY36 type connector / terminal row conversion module.
Length 5M. The largest input / output points: 20 points.
Power supply voltage: 24VDC.
Input points: 12 points.
Output points: 8 points.
Output type: Transistor (source).
Power consumption (W): 7.
Weight (kg):0.3.
Size (WxHxD) mm:75x90x49 FX1S-30MT-DSS.
All equipment is digital input and output point.
The total I/O points are not more than 30 points, and the input points are less than 16, the output points are less than 14 FX1S-30MT-DSS
Its MT series of PLC can drive 2 way servo or stepper, commonly used in the control system for a simple manipulator.
MITSUBISHI FX1S series PLC is suitable for the smallest package,
It is the preferred target for low cost users to seek powerful control over a limited range of I/0 FX1S-30MT-DSS.
FX1S provides up to 30 I/O points, and can be transmitted through serial communication data,
MT models also have the ability to locate, widely used in a variety of small mechanical equipment.Max input / output points: 60 points.
Supply voltage: 100 - 240VAC.
Input points: 36 points.
Output points: 24 points.
Output type: relay FX1S-30MT-DSS.
Power consumption (W): 35.
Weight (kg):0.8.
Size (WxHxD) mm:175x90x75.
Rich functionality.
FX series of products are rich in variety, users can be based on cost or application,
Choose the most suitable product. Will find a suitable model for the user site.
Terminal row type standard machine with extended input output
Can also be less of a system with analog or communication, etc..
CPU, power supply, input and output integration.
Display module or function expansion board can be less installed.
In addition, you can also reduce the input output or special module.
Built in 8000 step EPROM memory.
No battery. Maintenance free.
Overseas oriented products meet all kinds of international standards. Input and output points: 32 points.
Power supply: DC24V.
Input points: 16 points.
Input specification: leakage type.
Output points: 16 points.
Output form: transistor output (drain).
Power consumption: 8W.
Weight: 0.2KG.
Outline dimension: 34x90x87mm.
Ultra compact model.
Basic unit: 32.
FX3GC is a connector type of compact PLC,
In the same performance with the FX3GA/FX3G can also save space, the provincial connection.
Compact third generatiion standard model FX1S-30MT-DSS.
Connector type provincial space and provincial connection.
Suitable for small scale control of high cost.
Control points to 128 points, the use of CC-Link remote I/O can control the maximum 256 points.
N product dettails
Built in CPU, power supply, input and output FX1S-30MT-DSS.
Connector type input and output, the FX3 series of functions to compact body internal condensation.
Length 5M. The largest input / output points: 20 points.
Power supply voltage: 24VDC.
Input points: 12 points.
Output points: 8 points.
Output type: Transistor (source).
Power consumption (W): 7.
Weight (kg):0.3.
Size (WxHxD) mm:75x90x49 FX1S-30MT-DSS.
All equipment is digital input and output point.
The total I/O points are not more than 30 points, and the input points are less than 16, the output points are less than 14 FX1S-30MT-DSS
Its MT series of PLC can drive 2 way servo or stepper, commonly used in the control system for a simple manipulator.
MITSUBISHI FX1S series PLC is suitable for the smallest package,
It is the preferred target for low cost users to seek powerful control over a limited range of I/0 FX1S-30MT-DSS.
FX1S provides up to 30 I/O points, and can be transmitted through serial communication data,
MT models also have the ability to locate, widely used in a variety of small mechanical equipment.Max input / output points: 60 points.
Supply voltage: 100 - 240VAC.
Input points: 36 points.
Output points: 24 points.
Output type: relay FX1S-30MT-DSS.
Power consumption (W): 35.
Weight (kg):0.8.
Size (WxHxD) mm:175x90x75.
Rich functionality.
FX series of products are rich in variety, users can be based on cost or application,
Choose the most suitable product. Will find a suitable model for the user site.
Terminal row type standard machine with extended input output
Can also be less of a system with analog or communication, etc..
CPU, power supply, input and output integration.
Display module or function expansion board can be less installed.
In addition, you can also reduce the input output or special module.
Built in 8000 step EPROM memory.
No battery. Maintenance free.
Overseas oriented products meet all kinds of international standards. Input and output points: 32 points.
Power supply: DC24V.
Input points: 16 points.
Input specification: leakage type.
Output points: 16 points.
Output form: transistor output (drain).
Power consumption: 8W.
Weight: 0.2KG.
Outline dimension: 34x90x87mm.
Ultra compact model.
Basic unit: 32.
FX3GC is a connector type of compact PLC,
In the same performance with the FX3GA/FX3G can also save space, the provincial connection.
Compact third generatiion standard model FX1S-30MT-DSS.
Connector type provincial space and provincial connection.
Suitable for small scale control of high cost.
Control points to 128 points, the use of CC-Link remote I/O can control the maximum 256 points.
N product dettails
Built in CPU, power supply, input and output FX1S-30MT-DSS.
Connector type input and output, the FX3 series of functions to compact body internal condensation.
...More relevant models >>>>
Last one: 
next one: Related download