FX1S-20MT-DSS PLC
MITSUBISHI FX1S-20MT-DSS Manual And Instructions
FX1S-20MT-DSS datasheetPDF datasheet
FX1S-20MT-DSS PROGRAMMING MANUAL II
FX1S-20MT-DSS HARDWARE MANUAL
MITSUBISHI FX1S-20MT-DSS Product information and technical parameters：
Brand: MITSUBISHI
Name: PLC
Model: FX1S-20MT-DSS
The largest input / output points: 20 points.
Power supply voltage: 24VDC.
Input points: 12 points.
Output points: 8 points.
Output type: Transistor (source).
Power consumption (W): 7.
Weight (kg):0.3.
Size (WxHxD) mm:75x90x49.
All equipment is digital input and output point.
The total I/O points are not more than 30 points, and the input points are less than 16, the output points are less than 14.
Its MT series of PLC can drive 2 way servo or stepper, commonly used in the control system for a simple manipulator.
MITSUBISHI FX1S series PLC is suitable for the smallest package,
It is the preferred target for low cost users to seek powerful control over a limited range of I/0.
FX1S provides up to 30 I/O points, and can be transmitted through serial communication data,
MT models also have the ability to locate, widely used in a variety of small mechanical equipment.
...More relevant models >>>>
FX1S-20MT-DSS datasheetPDF datasheet
FX1S-20MT-DSS PROGRAMMING MANUAL II
FX1S-20MT-DSS HARDWARE MANUAL
MITSUBISHI FX1S-20MT-DSS Product information and technical parameters：
Brand: MITSUBISHI
Name: PLC
Model: FX1S-20MT-DSS
The largest input / output points: 20 points.
Power supply voltage: 24VDC.
Input points: 12 points.
Output points: 8 points.
Output type: Transistor (source).
Power consumption (W): 7.
Weight (kg):0.3.
Size (WxHxD) mm:75x90x49.
All equipment is digital input and output point.
The total I/O points are not more than 30 points, and the input points are less than 16, the output points are less than 14.
Its MT series of PLC can drive 2 way servo or stepper, commonly used in the control system for a simple manipulator.
MITSUBISHI FX1S series PLC is suitable for the smallest package,
It is the preferred target for low cost users to seek powerful control over a limited range of I/0.
FX1S provides up to 30 I/O points, and can be transmitted through serial communication data,
MT models also have the ability to locate, widely used in a variety of small mechanical equipment.
Function extension board for RS-232C communication.
No DC24V consumption, do not take up input and output. Function: AnyWireASLINK master station.
DC5V internal consumption current: 130mA. Can monitor and change the value of the soft component. Can also be simple to operate, change the data.
Can display Japanese and english FX1S-20MT-DSS.
Can be installed directly to the PLC, no wiring.
In addition, the use of FX3U-7DM-HLD, can be directly installed on the electrical cabinets FX1S-20MT-DSS Max input / output points: 16 points.
Power supply voltage: 24VDC.
Input points: 8 points.
Output points: 8 points.
Output type: Transistor (sinktype).
Power consumption: 25W.
Weight (kg):0.6.
Size (WxHxD) mm:130x90x86.
Built in CPU, power supply, input and output FX1S-20MT-DSS. By using a rich variety of functional extension boards and special adapters,
Can achieve high precision control.
Based on the function of FX2N has been greatly strengthened and enhanced.
High speed operation.
Basic instructions: 0.065 s/ instruction.
Application instruction: 0.642 s/ instruction.
Large capacity memory.
Built in program memory 64000 steps.
Flash memory cartridge with program transfer function FX1S-20MT-DSS.
Authentication。
Corresponding EN and UL/cUL authentication.
Faster and more efficient. Support high speed control and network communication, and have the function of data recording.
High speed, large capacity, multi-function high-end machine.
FX3U supports high speed processing, CC-Link communication, network communication, analog control and advanced positioning system.
Connected to the CC-Link, including the remote I/O, the maximum input and output control points up to 384 points,
Can correspond to a varietty of field needs, the use of its scalability and flexibility to expand the scope of application of the control system FX1S-20MT-DSS.
Third generation high function micro programmable controller.
High speed, high efficiency, high performance, large capacity, and new features FX1S-20MT-DSS.
Built in high speed processing and positioning.
Control points: maximum 256 points.
Use CC-Link remote I/O for 384 points.
No DC24V consumption, do not take up input and output. Function: AnyWireASLINK master station.
DC5V internal consumption current: 130mA. Can monitor and change the value of the soft component. Can also be simple to operate, change the data.
Can display Japanese and english FX1S-20MT-DSS.
Can be installed directly to the PLC, no wiring.
In addition, the use of FX3U-7DM-HLD, can be directly installed on the electrical cabinets FX1S-20MT-DSS Max input / output points: 16 points.
Power supply voltage: 24VDC.
Input points: 8 points.
Output points: 8 points.
Output type: Transistor (sinktype).
Power consumption: 25W.
Weight (kg):0.6.
Size (WxHxD) mm:130x90x86.
Built in CPU, power supply, input and output FX1S-20MT-DSS. By using a rich variety of functional extension boards and special adapters,
Can achieve high precision control.
Based on the function of FX2N has been greatly strengthened and enhanced.
High speed operation.
Basic instructions: 0.065 s/ instruction.
Application instruction: 0.642 s/ instruction.
Large capacity memory.
Built in program memory 64000 steps.
Flash memory cartridge with program transfer function FX1S-20MT-DSS.
Authentication。
Corresponding EN and UL/cUL authentication.
Faster and more efficient. Support high speed control and network communication, and have the function of data recording.
High speed, large capacity, multi-function high-end machine.
FX3U supports high speed processing, CC-Link communication, network communication, analog control and advanced positioning system.
Connected to the CC-Link, including the remote I/O, the maximum input and output control points up to 384 points,
Can correspond to a varietty of field needs, the use of its scalability and flexibility to expand the scope of application of the control system FX1S-20MT-DSS.
Third generation high function micro programmable controller.
High speed, high efficiency, high performance, large capacity, and new features FX1S-20MT-DSS.
Built in high speed processing and positioning.
Control points: maximum 256 points.
Use CC-Link remote I/O for 384 points.
...More relevant models >>>>
Last one: 
next one: Related download